DESCRIPTION

Overlay Accelerator
Accelerator for Pro-Stamp bag mix. Overlay Accelerator will speed up the set time when ambient temperatures are cooler. Not recommended to use in temperatures above 75°F (24°C) or in the direct sun on a hot day.
Coverage: 1500 sf/25 lb pail

Potlife Extender
Retarder for all of Proline’s cementitious bag mix coatings. Extends the pot life of cementitious coatings to keep the material fresh and workable during the application.
Coverage: 6000 – 10,000 sf/gal

Pro-Bond Polymer Concentrate
Reactive primer for cementitious coatings. Pro-Bond seals the pores of the concrete and creates a chemical bond between the concrete and cement-based materials. This prevents the concrete from absorbing the water from resurfacing and overlay products which allows for easier workability, smoother coverage, and better colour control. Concentrated formula – Dilute with one-part water.
Coverage: 400 sf/gal
• Increases bond strength
• Prevents uneven drying
• Promotes colour control

Pro-Colour Pack
Specifically designed to colour Proline’s resurfacing and overlay materials. Mix 1 Pro-Colour Pack per bag of Pro-Stamp or Pro-Texture. Mix 2 Pro-Colour Packs per bag of Pro-Surfacer White, Pro-MicroTop White, or Pro-SprayCote. Available in 40 standard colours.

Pro-Spraycote
Just-add-water, polymer-modified cement coating. Designed as a thin, sprayable, paint-like coating that restores or changes the colour of textured, stamped concrete or stamped overlay. Pro-SprayCote is applied using a compressor charged industrial pump-up sprayer or HVLP spray equipment. In most cases Pro-Bond is recommended as a primer.
Recommend colouring using Pro-Colour Packs.
Coverage: 400 – 500 sf/32 lb Bag

Pro-Stamp
Just-add-water, high strength, polymer modified, stampable overlay. Designed to transform plain grey concrete into beautiful, decorative and textured surfaces that resemble slate, tile, stone, brick, cobblestone, wood, etc… Pro-Stamp can also be used as a patching and levelling compound to fill and repair spalled and uneven concrete from 0 – 1/2” thick. Can also be applied from 3/4” – 1 1/2” thick when 1-gallon 3/8” pea gravel is added to the bag. Pro-Stamp is salt/ice melt resistant.
Coverage: Stamp overlay 20-25 sf/50 lb Bag. Patching and levelling – coverage varies by thickness

Pro-Surfacer
Just-add-water, high strength, polymer modified resurfacing product. Designed to restore, repair, and resurface old, stained, and ugly concrete. Pro-Surfacer is applied by magic trowel, squeegee, hand trowel, or broom depending on the desired texture or finish. Also applied as a base coat prior to Pro-Texture, Pro-Stamp, Pro-MicroTop applications. Pro-Surfacer is salt/ice melt resistant. Available in white and gray.
White – can be integrally coloured with Pro-Colour Packs or topically coloured with acid, water-based, or solvent based stains.
Gray – closely matches standard gray concrete colour.
Coverage: 100-300 sf/40 lb Bag

Pro-Texture
Just-add-water, polymer modified coating designed to provide a decorative, slip resistant finish commonly used on pool decks, patios, driveways, walkways etc… Designed to restore, repair, and resurface old, stained, and ugly concrete in a textured finish. Can be sprayed with a hopper gun and knocked down with a trowel to produce a trowel knockdown finish. Can also be applied by hand trowel or gauge rake at 1/8” thick and stamped with various texture skins to create elegant stone or brick designs for bands, borders, and other small areas. Pro-Texture is salt/ice melt resistant.
Coverage: Spray Texture 150 sf/bag, 1/8” stamp borders 50 sf/bag